 |
|
Colormetry
Water
hardness is considered to be the most common factor in damaging a boiler. The hardness level (ionic concentration) of water
inflow to a boiler has been checked manually by using chemical reagents as indicators. The manual measurement of these conventional
methods comprises such problems as: time consumption; personal error or deviation; and, lack of continuity in monitoring hardness
leakage. Colormetry solves all these problems by offering an automatic monitoring system for sample water collection, chemical
reagent injection, mixing, and evaluation.
- Totally automatic control; simple and timesaving
procedure
- No routine calibration necessary
- Set standard time period for monitor
- With remote control, initiate and terminate the monitoring
system from outside the boiler room
- Monitor hardness leakage at each set time, which enables
early detection of hardness leakage
- Detect low levels of hardness leakage, such as 1-2 mg/L
by optically and electronically monitoring the color of sample water
- The result of the evaluation for hardness level
is shown on the digital screen, which indicates the efficiency of water softener; instant recognition of the stage of operation
by digital signature
- Buzzer alarms when any hardness leakage is detected; with
the external alarm contact outlet, the alarm can be sent to a remote location
- Equipped with self check/confirm function; in case
the device faults, the main cause of the problem is shown in the same manner as the evaluation of hardness leakage
- Memorizes date, time, duration of hardness leakage, and
time of reinstatement for up to three consecutive incidents; memory function assists in analysis of the causes of hardness
leakage
- The cartridge contains all the necessary chemical reagent
and can be replaced with a one-touch, simple motion; in normal operation, the cartridge does not have to be replaced for approximately
4 months (Note: Use the supplied transformer to step down from the AC 120V to 24V and supply 24V to main unit)
- Unique compact design automatic colorimeter
device
- Easy installation on the wall with mounting
brackets attached to the device
- One-touch connection of collection and drain lines to the
device
|
