|
MP
Pumps
*
FLOMAX 5, 8, 10, 15, 30, 40
*
Performance curves
*
Cast iron, bronze, or aluminum construction
* Close coupled, pedestal or foot mount
* Available with motor or PUMPAK only
* Electric or engine driven
* Flows to 700 gpm
*
Hydraulic drive and CLUTCHPAK options
------------------------------------------------------------------------------
> Click here for Economical Self-Priming Pump brochure/spec sheet
MP Pumps
* EMAX
* All cast iron construction
* Chemical duty carbon/ceramic/Viton seal
* 303SS drive sleeve
* Close-coupled C-Face motor, engines or bearing pedestal
* Back pull-out design for easy maintenance
* Pump and motor complete in a compact light-weight
package
------------------------------------------------------------------------------
|
| Self-Priming Trash Pump |
> Click here for Trash Pump brochure/spec sheet
|
Pump Model |
2CT |
3CT |
|
Type of motor |
Close
coupled to electric motor or pedestal for standard motor |
Close
coupled to electric motor or pedestal for standard motor |
|
Pipe Size |
2”
x 2” |
3”
x 3” |
|
Impeller |
Ductile
iron |
Ductile
iron |
|
Shaft Sleeve |
304
Stainless steel |
304
Stainless steel |
|
Seals |
Carbon/
ceramic Viton mechanical seal |
Carbon/
ceramic mechanical seal, Viton |
|
Housing |
Cast
iron |
Cast
iron |
|
Fasteners |
Stainless
steel |
Stainless
steel |
|
Max Flow |
210
GPM |
350
GPM |
|
Max Pressure |
125
Feet Head |
125
Feet Head |
|
Bearing Pedestal |
- |
- |
|
*Parts are available for a 4” and 6” trash pump. |
|
|
|
------------------------------------------------------------------------------ |
|
| End Suction Centrifugal Pump |
> Click here for End Suction Pump brochure/spec sheet
MP
Pumps
*
Cast iron, bronze, or aluminum construction
* Close coupled, pedestal, or foot mount
*
Available with motor or PUMPAK only
* Available in CLUTCHPAK (pump with
integral clutch)
* Electric or engine driven
* Vertical or horizontal
discharge
------------------------------------------------------------------------------
> Click here for Economical Cast Iron Pump brochure/spec sheet
MP Pumps
* Cast iron pump housing and seal housing
* Industrial duty carbon/ceramic/Buna seal
* Durable molded Noryl impellers
* Close-coupled to Nema motors
* Back pull-out design for easy maintenance
* Mounting base included
* Pump and motor complete in a compact, light-weight package
------------------------------------------------------------------------------
|
| CHEMFLO End Suction Pump |
> Click here for CHEMFLO End Suction brochure/spec sheet
MP Pumps
* Investment cast,
316 CF8M stainless steel housing, adaptor, and impeller
* Standard - Viton
“O” Ring
* Standard - Viton
Type 2100 mechanical seal
* Optional - Teflon
Type 9 and hard face mechanical seals
* Exotic Elastomers
and seals available
* 1 HP, 1.5 HP,
2 HP & 3 HP
* Pumpaks For
56C face-motors
* Pedestal Models available for long-coupling
--------------------------------------------------------------------------
|
| Centrifugal Hot Oil Pump |
> Click here for Hot Oil Pump brochure/spec sheet
MP Pumps
* Isolated seal chamber
* Standard carbon,ceramic, Viton mechanical seal,
stainless fitted
* Carbon graphite bushing isolate seal from high temperature fluid
*
Stainless steel drive sleeve
* Vertical or horizontal discharge
*
Flow to 200 gpm / 140’ head
* Temperatures to 650 F
------------------------------------------------------------------------------
|
| High Head Centrifugal Pump |
> Click here for High Head brochure/spec sheet
MP Pumps
* "C" FACE electrical motor drive 5-7.5 HP
* Pedestal
drive
* Flow: to 140 GPM / 190 TDH
* Cast iron or bronze construction
*
304 SS drive sleeve
* Stainless steel fasteners
* Seals:
standard carbon, ceramic, stainless steel, and Viton (other options available)
-----------------------------------------------------------
|
| Hydraulic Pump |
> Click here for Hydraulic Pumps brochure/spec sheet
MP
Pumps
The seal-less
hydraulic motor driven centrifugal pumps are standard MP self-priming and straight centrifugal pumps in which the pump impeller
and the hydraulic motor have been combined so that they share a common stainless steel shaft. The common shaft seal is located
in the hydraulic motor and its faces are lubricated by the clean hydraulic oil. These pumps are explosion proof, resistant
to corrosive and abrasive environments, can operate totally submerged, can be remotely controlled, mounted anywhere, and are
very portable when connected with quick disconnects. They are also able to run “dry” for indefinite periods without
damage. They are designed to offer long trouble-free life when matched to a hydraulic power source which will give the correct
oil flow and pressure. A wide range of pump outputs can be achieved by simply controlling oil flow and pressure to the hydraulic
motor.
------------------------------------------------------------------------------
> Click here for High Flow Pump brochure/spec sheet
MP Pumps
* Available horsepower: 1HP, 1.5HP, and 2HP
* Available connection: flange mounted
* Available flow rate: 350GPM at 7PSI
* Available motor voltage: 115/208/230V, 208/230/460V, 190/380V, 415V, 575V
------------------------------------------------------------------------------
> Click here for FRX brochure/spec sheet
MP Pumps
* Close coupled to electric motors
* 316 SS construction
* FRX 50-R polyphenylene housing and cover
* Flows 8-50 GPM
* Presures 9’-85’ head
* Impeller: stainless steel
* FRX 75-SP: suction lift to 12’
* Mechanical seals: carbon, ceramic, Viton
* Motor options: AC and DC
* FRX 125 AC only
|
